Hoses
Stainless Steel, Teflon* Lined Hose Assemblies
 |
EMC2’s Teflon* Lined, medium pressure hose assemblies are used all over the industry in the adhesive and chemical fields. The hoses feature a stainless steel braid wrapped around a Teflon* core and come in diameters ranging from 1/4” to 1-1/4”. The working pressure for these hoses varies from 750 psi to 3000 psi, depending on the diameter and choice of connector. The standard ends are 37 degree female swivels in brass, steel or stainless steel. 
Download
PDF
Request
Quote |
M-1204 Water Traced Hose Assemblies
 |
Water traced hose assemblies are constructed to customer specifications. A stainless steel, Teflon* lined material hose and water hoses run next to each other for water temperature transfer to material. The hoses are then covered with insulation and a nylon mesh sleeve. Material hose pressures range from 750-6000 psi and sizes range from ¼” to 1¼”. The standard ends are 37 degree female swivels in brass, steel or stainless steel. Choose from size, length, number and type of water lines.
Download
PDF
Request
Quote |
M-2365 Water Encapsulated Hose Assemblies
 |
Water encapsulated hose assemblies are constructed to customer
specifications. A stainless steel, Teflon* lined material hose
has a water hose covering it and is totally encapsulated in
water for better temperature transfer to material. The hose has
a special designed barbed aluminum ends to connect the material
and water hoses. Material hose pressures range from 750-3000 psi
and sizes range from ¼” to 1¼”. The standard ends are female
NPT.
Download
PDF
Request
Quote |
M-3713 Heated Hose Assemblies
 |
Finally, a heated hose designed especially for the adhesive
dispensing industry. These hoses can handle temperatures up to
200°F and pressures up to 6000 psi. They are available in 10 or
20 watts per foot and come with an easy to use with power cord
and Amp* connector, Teflon* core for chemical compatibility, and
abrasion resistant jacket for industrial use.
Download
PDF
Request
Quote |