Dispensing Guns
Two Component Dispense Guns
M-830 Series Two Component Dispensing Gun
 |
EMC ˛ offers versatility and precision for manual or robotic
applications with our air operated automatic adhesive gun,
designed for consistency, dependability and long term operation
with a broad range of two component adhesive formulations. The
M-830 dispense gun employs a balanced spool design and draws
back to close the valves insuring a clean cut off of the
dispense bead. The lightweight, aluminum gun is compact (2"x 2"
x 8") for robotic applications or can be fitted with an air or
electric operated trigger handle for manual operation. It
readily adapts to many different disposable mixers.
Download
PDF
Request
Quote |
M-4500 Series Two Component Dispensing Gun
 |
The
M-4500 series dispensing gun is similar to the M-830 in design,
used for lower flow rate applications. The gun features an
adjustable stroke which allows the user to tune the amount of
pressure at the tip to insure a clean break to the glue path.
This gun also works with a broad range of two component adhesive
formulations. The lightweight, aluminum gun is compact (2"x 2" x
8") for robotic applications or can be fitted with an air or
electric operated trigger handle for manual operation. It
readily adapts to many different disposable mixers.
Download
PDF
Request
Quote |
M-4500S Two Component Dispensing Gun
|
|
The
M-4500S dispensing gun is almost identical to the M-4500 in
design, but is used for even lower flow rate applications than
the M-830 series model. The gun features an adjustable stroke
which allows the user to tune the amount of pressure at the tip
to insure a clean break to the glue path. This gun also works
with a broad range of two-component adhesive formulations. The
lightweight, aluminum gun is compact (2"x 2" x 8") for robotic
applications or can be fitted with an air or electric operated
trigger handle for manual operation. It readily adapts to many
different disposable mixers.
Download
PDF
Request
Quote |
M-6600 Two Component Dispensing gun
 |
EMC˛
offers versatility and precision for manual or robotic
applications with our air operated automatic adhesive gun,
designed for consistency, dependability and long term operation
with a broad range of two component adhesive formulations. The
M-6600 dispense gun employs a balanced spool design and draws
back to close the valves insuring a clean cut off of the
dispense bead. This gun uses the 830 platform but uses the
pressurized seal design to extend the seal and spool life in
severe duty applications. The lightweight, aluminum gun is
compact (2"x 2" x 8") for robotic applications or can be fitted
with an air or electric operated trigger handle for manual
operation. It readily adapts to many different disposable
mixers.
Download PDF
Request Quote |
M-6601 Two Component Dispensing gun
 |
EMC˛
offers versatility and precision for manual or robotic
applications with our air operated automatic adhesive gun,
designed for consistency, dependability and long term operation
with a broad range of two component adhesive formulations. The
M-6600 dispense gun employs a balanced spool design and draws
back to close the valves insuring a clean cut off of the
dispense bead. This gun uses the 830 platform but uses the
pressurized seal design to extend the seal and spool life in
severe duty applications. The lightweight, aluminum gun is
compact (2"x 2" x 8") for robotic applications or can be fitted
with an air or electric operated trigger handle for manual
operation. It readily adapts to many different disposable
mixers.
Download
PDF
Request
Quote |
M-6750 Two Component Spray Gun
 |
EMC˛
offers versatility and precision for spraying applications with
our air operated M-6750 series spray gun. Designed to compete in
the foam and polyurea spray industry, this gun boasts a
lightweight aluminum housing and removable component sections
for easy cleaning. The guns handle has a trigger valve built in,
which can be used in manual applications or removed for
automatic spraying. At the heart of this design are “plug” style
valves that are opened and closed on demand and an air purge
system designed to clear the mix chamber and spray tip when the
trigger is released. The spray tip mount readily adapts to a
variety of different spray tips.
Download
PDF
Request
Quote |
Single Component Dispense Guns & Valves
M-4005B Tip Shut-off Valves
 |
The M-4005B Tip Shut-off dispensing valve is an adaptation of
the M-4000B series valve line. By design, this valve features a
seat that is as close to the dispensing point as physically
possible. This guarantees a drip free shut off at the dispense
nozzle and allows a neater finish to the dispensed bead.
Designed and built by EMC˛, this valve was rigorously tested to
insure long life, low maintenance and reliability. The 4000
series valve comes in a variety of sizes and flow rates to meet
all of your requirements. Standard port sizes range from #6 SAE
to #12 SAE. The “divorced” design allows the visual inspection
of open/closed function and prevents material leaks from
affecting the air actuator and other air components upstream of
the valve.
Download
PDF
Request
Quote |
M-4004B Windshield Urethane Valves
 |
The M-4005B Windshield Urethane Valve is a specialty valve based
on the highly successful 4000 series valve line. Featuring a
removable, replaceable polyethylene tip, this valve is
unsurpassed as a windshield urethane dispense gun. The tips come
in varying lengths and sizes and each tip has a precision shaped
outlet to form the bead shape. The “divorced” design allows the
visual inspection of open/closed function and prevents material
leaks from affecting the air actuator and other air components
upstream of the valve
Download
PDF
Request
Quote |
M-4008B Mastic Valves
 |
The M-4008B Mastic valve is a specialty valve based on the
highly successful 4000 series valve line. The compact design and
reliability of this valve make it a must for dispensing mastics.
Used by itself on a robot or mounted in banks when dispensing
drops, this valve outperforms the competition time after time.
Uniquely designed to mount on a round extension tube, this valve
is a model of versatility. The “divorced” design allows the
visual inspection of open/closed function and prevents material
leaks from affecting the air actuator and other air components
upstream of the valve.
Download
PDF
Request
Quote |
M-1640 Dispense Gun
 |
EMC ˛ offers versatility and precision for manual or robotic
applications with our air operated automatic adhesive gun,
designed for consistency, dependability and long term operation
with a broad range of single component adhesive formulations.
Like the M-830 dispense gun series, this valve employs a
balanced spool design and draws back to close the valve insuring
a clean cut off of the dispense bead. The lightweight, aluminum
gun is compact (2"x 2" x 8") for robotic applications or can be
fitted with an air or electric operated trigger handle for
manual operation. It readily adapts to many different dispensing
tips. Download
PDF
Request
Quote |
M-4600 Single Component Flow Gun
 |
The EMC ˛ M-4600 series flow gun is the perfect option for
manually dispensing high viscosity windshield urethanes and
other single component products. A comfortable handle and grip
gives the operator freedom and mobility while dispensing around
difficult part configurations. The close relationship between
the operators hand and dispensing tip is what makes this flow
gun attractive.
Download
PDF
Request
Quote |